The new firmware is out for the detector and so is the new python scripts for datalogging.
What's new? Quite a lot:
Check out the details here: https://github.com/mvadai/muonhunter
I love RPN calculators so for you fellow fans I made a script to estimate the output voltage of the HV board when using a standard 10 MO multimeter. (You can use a spreadsheet, python, matlab, etc of course, but where's the fun in that?)
Once you have the linear regression parameters you can calculate the voltage based on an empirical formula you'll find out. Then just one measurement at the HV test point is needed.
CODE examples are on GitHub
About this blog
Welcome and thanks for visiting my site.